sbgECom Library
4.0.1987-stable
C library to interface SBG Systems IMU/AHRS/INS
|
Parse IMU (Inertial Measurement Unit) measurement logs. More...
Go to the source code of this file.
Data Structures | |
struct | _SbgEComLogImuLegacy |
struct | _SbgEComLogImuShort |
struct | _SbgEComLogImuFastLegacy |
Macros | |
#define | SBG_ECOM_IMU_COM_OK (0x00000001u << 0) |
#define | SBG_ECOM_IMU_STATUS_BIT (0x00000001u << 1) |
#define | SBG_ECOM_IMU_ACCEL_X_BIT (0x00000001u << 2) |
#define | SBG_ECOM_IMU_ACCEL_Y_BIT (0x00000001u << 3) |
#define | SBG_ECOM_IMU_ACCEL_Z_BIT (0x00000001u << 4) |
#define | SBG_ECOM_IMU_GYRO_X_BIT (0x00000001u << 5) |
#define | SBG_ECOM_IMU_GYRO_Y_BIT (0x00000001u << 6) |
#define | SBG_ECOM_IMU_GYRO_Z_BIT (0x00000001u << 7) |
#define | SBG_ECOM_IMU_ACCELS_IN_RANGE (0x00000001u << 8) |
#define | SBG_ECOM_IMU_GYROS_IN_RANGE (0x00000001u << 9) |
Typedefs | |
typedef struct _SbgEComLogImuLegacy | SbgEComLogImuLegacy |
typedef struct _SbgEComLogImuShort | SbgEComLogImuShort |
typedef struct _SbgEComLogImuFastLegacy | SbgEComLogImuFastLegacy |
Functions | |
SbgErrorCode | sbgEComLogImuLegacyReadFromStream (SbgEComLogImuLegacy *pLogData, SbgStreamBuffer *pStreamBuffer) |
SbgErrorCode | sbgEComLogImuLegacyWriteToStream (const SbgEComLogImuLegacy *pLogData, SbgStreamBuffer *pStreamBuffer) |
SbgErrorCode | sbgEComLogImuShortReadFromStream (SbgEComLogImuShort *pLogData, SbgStreamBuffer *pStreamBuffer) |
SbgErrorCode | sbgEComLogImuShortWriteToStream (const SbgEComLogImuShort *pLogData, SbgStreamBuffer *pStreamBuffer) |
SbgErrorCode | sbgEComLogImuFastLegacyReadFromStream (SbgEComLogImuFastLegacy *pLogData, SbgStreamBuffer *pStreamBuffer) |
SbgErrorCode | sbgEComLogImuFastLegacyWriteToStream (const SbgEComLogImuFastLegacy *pLogData, SbgStreamBuffer *pStreamBuffer) |
float | sbgEComLogImuShortGetDeltaAngle (const SbgEComLogImuShort *pImuShort, size_t idx) |
float | sbgEComLogImuShortGetDeltaVelocity (const SbgEComLogImuShort *pImuShort, size_t idx) |
float | sbgEComLogImuShortGetTemperature (const SbgEComLogImuShort *pImuShort) |
Parse IMU (Inertial Measurement Unit) measurement logs.
The MIT license
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#define SBG_ECOM_IMU_COM_OK (0x00000001u << 0) |
Log inertial data status mask definitions Set to 1 if the communication with the IMU is ok.
#define SBG_ECOM_IMU_STATUS_BIT (0x00000001u << 1) |
Set to 1 if the IMU passes general Built in Tests (calibration, CPU, ...).
#define SBG_ECOM_IMU_ACCEL_X_BIT (0x00000001u << 2) |
Set to 1 if the accelerometer X passes Built In Test.
#define SBG_ECOM_IMU_ACCEL_Y_BIT (0x00000001u << 3) |
Set to 1 if the accelerometer Y passes Built In Test.
#define SBG_ECOM_IMU_ACCEL_Z_BIT (0x00000001u << 4) |
Set to 1 if the accelerometer Z passes Built In Test.
#define SBG_ECOM_IMU_GYRO_X_BIT (0x00000001u << 5) |
Set to 1 if the gyroscope X passes Built In Test.
#define SBG_ECOM_IMU_GYRO_Y_BIT (0x00000001u << 6) |
Set to 1 if the gyroscope Y passes Built In Test.
#define SBG_ECOM_IMU_GYRO_Z_BIT (0x00000001u << 7) |
Set to 1 if the gyroscope Z passes Built In Test.
#define SBG_ECOM_IMU_ACCELS_IN_RANGE (0x00000001u << 8) |
Set to 1 if all accelerometers are within operating range.
#define SBG_ECOM_IMU_GYROS_IN_RANGE (0x00000001u << 9) |
Set to 1 if all gyroscopes are within operating range.
typedef struct _SbgEComLogImuLegacy SbgEComLogImuLegacy |
Structure that stores data for the SBG_ECOM_LOG_IMU_DATA message.
This message returns synchronous IMU measurements that are aligned to UTC time.
All SBG Systems INS, except ELLIPSE products, use an IMU that provides asynchronous measurements. The INS has to extrapolate the IMU measurements to the current EKF processing loop.
For a 200Hz processing loop, the extrapolation can be as high as 5ms. The extrapolation process introduces artificial noise in the measurements.
This message is thus not suitable for post processing for example.
If you would like IMU measurements correctly time stamped to UTC/GPS time but as output by the IMU (asynchronously), please use SBG_ECOM_LOG_IMU_SHORT
WARNING: This message is not recommended for new designs and will be deprecated in sbgECom 5.x
typedef struct _SbgEComLogImuShort SbgEComLogImuShort |
Structure that stores data for the SBG_ECOM_LOG_IMU_SHORT message.
This message is sent asynchronously and must be used for post processing.
typedef struct _SbgEComLogImuFastLegacy SbgEComLogImuFastLegacy |
Structure that stores the data for SBG_ECOM_LOG_FAST_IMU_DATA message
WARNING: This message is not recommended for new designs and will be deprecated in sbgECom 5.x
SbgErrorCode sbgEComLogImuLegacyReadFromStream | ( | SbgEComLogImuLegacy * | pLogData, |
SbgStreamBuffer * | pStreamBuffer | ||
) |
Parse data for the SBG_ECOM_LOG_IMU_DATA message and fill the corresponding structure.
[out] | pLogData | Log structure instance to fill. |
[in] | pStreamBuffer | Input stream buffer to read the log from. |
SbgErrorCode sbgEComLogImuLegacyWriteToStream | ( | const SbgEComLogImuLegacy * | pLogData, |
SbgStreamBuffer * | pStreamBuffer | ||
) |
Write data for the SBG_ECOM_LOG_IMU_DATA message to the output stream buffer from the provided structure.
[in] | pLogData | Log structure instance to write. |
[out] | pStreamBuffer | Output stream buffer to write the log to. |
SbgErrorCode sbgEComLogImuShortReadFromStream | ( | SbgEComLogImuShort * | pLogData, |
SbgStreamBuffer * | pStreamBuffer | ||
) |
Parse data for the SBG_ECOM_LOG_IMU_SHORT message and fill the corresponding structure.
[out] | pLogData | Log structure instance to fill. |
[in] | pStreamBuffer | Input stream buffer to read the log from. |
SbgErrorCode sbgEComLogImuShortWriteToStream | ( | const SbgEComLogImuShort * | pLogData, |
SbgStreamBuffer * | pStreamBuffer | ||
) |
Write data for the SBG_ECOM_LOG_IMU_SHORT message to the output stream buffer from the provided structure.
[in] | pLogData | Log structure instance to write. |
[out] | pStreamBuffer | Output stream buffer to write the log to. |
SbgErrorCode sbgEComLogImuFastLegacyReadFromStream | ( | SbgEComLogImuFastLegacy * | pLogData, |
SbgStreamBuffer * | pStreamBuffer | ||
) |
Parse data for the SBG_ECOM_LOG_FAST_IMU_DATA message and fill the corresponding structure.
[out] | pLogData | Log structure instance to fill. |
[in] | pStreamBuffer | Input stream buffer to read the log from. |
SbgErrorCode sbgEComLogImuFastLegacyWriteToStream | ( | const SbgEComLogImuFastLegacy * | pLogData, |
SbgStreamBuffer * | pStreamBuffer | ||
) |
Write data for the SBG_ECOM_LOG_FAST_IMU_DATA message to the output stream buffer from the provided structure.
[in] | pLogData | Log structure instance to write. |
[out] | pStreamBuffer | Output stream buffer to write the log to. |
float sbgEComLogImuShortGetDeltaAngle | ( | const SbgEComLogImuShort * | pImuShort, |
size_t | idx | ||
) |
Return from an IMU Short log, the X, Y or Z delta angle value in rad.s^-1
[in] | pImuShort | Input IMU short message instance. |
[in] | idx | The component to return from 0 to 2. |
float sbgEComLogImuShortGetDeltaVelocity | ( | const SbgEComLogImuShort * | pImuShort, |
size_t | idx | ||
) |
Return from an IMU Short log, the X, Y or Z delta velocity value in m.s^-2
[in] | pImuShort | Input IMU short message instance. |
[in] | idx | The component to return from 0 to 2. |
float sbgEComLogImuShortGetTemperature | ( | const SbgEComLogImuShort * | pImuShort | ) |
Return from an IMU Short log, the temperature in °C
[in] | pImuShort | Input IMU short message instance. |